Cisco 800 analoq telefon config
Hamiya salamlar.
1. Cisco 800 Seriyasi olan (cisco 881-v (mpc8300)) modelinde mənə analog telefonun config etməyə komək edəsiz 🙂 . 3-6 portlara 4 rəqəmli nömrə olmalı ve onlarda 1-1 zəng ede bilsinler. (ardi gelecek hele 1 etapdir )
Baxılıb: 2311 dəfə
Bu sual The virtual machine is configured for 64-bit guest operating system. However, 64-bit operation is not possible məqaləsinə sual olaraq verilmişdir.
Cavablar ( 6 )
Salam,
avadanligin “show version” “show running-config” gonderin zehmet olmasa
eger mexfi melumat varsa(public ip address username ve.s) onlari silin
Teshekkurler
Router#sh ver
Cisco IOS Software, C880 Software (C880VOICE-UNIVERSALK9-M), Version 15.2(4)M4, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Thu 20-Jun-13 16:56 by prod_rel_team
ROM: System Bootstrap, Version 15.1(2r)T3, RELEASE SOFTWARE (fc1)
Router uptime is 8 minutes
System returned to ROM by reload at 16:17:09 AZT Thu Mar 5 2015
System image file is “flash:c880voice-universalk9-mz.152-4.M4.bin”
Last reload type: Normal Reload
Last reload reason: Reload Command
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
Cisco 881-V (MPC8300) processor (revision 1.0) with 498688K/25600K bytes of memory.
Processor board ID FCZ1733C3WH
5 FastEthernet interfaces
2 ISDN Basic Rate interfaces
1 Virtual Private Network (VPN) Module
1 Voice FXO interface
4 Voice FXS interfaces
1 DSP, 16 Voice resources
256K bytes of non-volatile configuration memory.
247464K bytes of ATA CompactFlash (Read/Write)
License Info:
License UDI:
————————————————-
Device# PID SN
————————————————-
*0 C881-V-K9 FCZ1733C3WH
License Information for ‘c880-srst’
License Level: advipservices Type: Permanent
Next reboot license Level: advipservices
Configuration register is 0x2102
Router#
show running-config -hecne yoxdur. Rutor tezedir. test etmek isteyirem. Mesele beledir ki baş offisdə E0 portu ilə ats qoşulub. hər filaldada nomrələr var. HO offiseden fillara 07xxxx ile yiqilir. onlarda bize rutorda 91xx. mes: (91xx HO. 15xx Filal)
dial-peer voice 91 voip
description HO
destination-pattern 91..
session target ipv4:xxx.xxx.xxx.xxx
dtmf-relay h245-alphanumeric
codec g711ulaw
no vad
dial-peer voice 715 voip
description TEST
destination-pattern 15..
session target ipv4:10.10.1.200
dtmf-relay h245-alphanumeric
codec g711ulaw
no vad
1 az qeliz mesledir çox config yaza bilməyəcəyəm. ortada ACS + VPN var.
salam.
Ancaq analog portlara nömrə vermək isteyirsensə. POTS dial-peer yarat hansı nömrəni isteyirsen ora yönlendir.
HO dial eləmək üçün topologiyanı bilmək lazım olacaq. məs CUCM varmı? E1 olan Router CUCM-a necə birləşib? (h323 və ya SİP) və s.
Salam Salman bey. CUCM yoxdur.
Məsələ aydin oldu. Çox sağ olun Ağa muəllim.